Specifications & Test Data

Royale Touche PROMAXX Technical Specifications

Every specification and test result from the Royale Touche PROMAXX catalogue in one table, with what the numbers mean for your furniture.

PROMAXX Plywood Specifications

PropertyPROMAXX
GradeBWP grade, Marine grade (IS:710)
SpeciesDipterocarpus spp. (Gurjan) and selected hardwood (Eucalyptus spp.)
Face veneerGurjan on both sides, 0.30mm
Sheet sizes2440 × 1220 mm (8×4 ft) and 2140 × 1220 mm (7×4 ft)
Length tolerance+2 to 4mm of specified length
Width tolerance+1 to 2mm of specified width
Thicknesses6, 9, 12, 16, 19 and 25mm
Thickness toleranceFull thickness (exact thickness as specified)
CalibrationBoth sides calibrated
ResinBWP-grade high-solid phenolic polymer
EmissionE0, CARB certified: 0.5 mg/L, ≤ 0.041 ppm formaldehyde
Preservative treatmentFour-stage (veneer, resin, adhesive and surface): Ter-Bo Kill 4X
Edge straightness0.20%
Squareness0.20%
Density700 to 720 kg/m³
Core gap / overlap100% fully composed sheets, no gaps or overlaps
Water absorption1–2% at 24 hrs; 2–3% at 48 hrs
Screw holding> 265 kg
Nail holding> 155 kg

From the Royale Touche PROMAXX catalogue. (The catalogue prints density as "kg/cm³"; plywood density is measured per m³.)

Test Results

TestResult
Glue adhesion (dry)Average > 1590 N, individual > 1310 N; adhesion of plies excellent
Boiling water resistance (after 72 hrs boiling)Wet average > 1190 N, individual > 1020 N; adhesion excellent
Boiling waterproof test120 hours (Royale Touche) vs 72 hours (other plywood, brand comparison)
Cycle test8 hrs in boiling water, 16 hrs drying at 65 °C, repeated for 6 cycles
Mycological testGlue shear strength 1070 N; adhesion excellent
Preservative retention12.5 kg/m³ (VPT treatment)
Modulus of rupture, dryAlong grain > 58 N/mm², across > 49 N/mm²
Modulus of elasticity, dryAlong grain > 7990 N/mm², across > 6400 N/mm²
Modulus of rupture, wetAlong grain > 35 N/mm², across > 29 N/mm²
Modulus of elasticity, wetAlong grain > 4090 N/mm², across > 3360 N/mm²
Tensile strengthAlong grain > 58 N/mm², across > 39 N/mm², sum > 97 N/mm²
Flammability / rate of burning30 minutes / 20 minutes (IS 5509)
Royale Touche PROMAXX technical specifications page 1
Specifications, page 1.
Royale Touche PROMAXX technical specifications page 2: glue adhesion, boiling water resistance and bending strength
Specifications, page 2.

What These Numbers Mean on Site

Full thickness

A 19mm sheet measures 19mm, so shutters and carcasses line up and hardware fits as drawn.

Screw holding > 265 kg

Hinges and drawer channels stay tight over years of use, helped by core sheets with no gaps.

120-hour boil test

Royale Touche's boiling-water test runs 120 hours against 72 for other plywood in its comparison: the margin that matters under a sink.

E0, ≤ 0.041 ppm

The lowest formaldehyde class, certified by CARB, for bedrooms, kids' rooms and closed wardrobes. More on E0 →

Royale Touche PROMAXX boiling waterproof test: 120 hours versus 72 hours for other plywood, plus cycle test
BWP: 120-hour boiling test.
Royale Touche PROMAXX CARB certified E0 zero emission plywood, 0.5 mg/L
CARB certified E0.
Royale Touche PROMAXX screw holding above 265 kg and nail holding above 155 kg
Screw > 265 kg, nail > 155 kg.

📄 Download the full Royale Touche PROMAXX catalogue (PDF)

Need the Data Sheet for a Project?

We can send the catalogue and test data to your architect or contractor along with a quotation.

📍 View on Google Maps — Lati Bazar, Ahmedabad

Frequently Asked Questions

BWP / Marine grade to IS:710, bonded with BWP-grade high-solid phenolic polymer resin.
Yes. PROMAXX is CARB certified E0, with formaldehyde emission of 0.5 mg/L (≤ 0.041 ppm).
Above 265 kg for screws and above 155 kg for nails, according to Royale Touche.
700 to 720 kg/m³. (The catalogue prints kg/cm³, which is a typo for kg/m³.)
Gurjan (Dipterocarpus) with selected hardwood (Eucalyptus), with Gurjan face veneers on both sides.
💬 Chat on WhatsApp Ask about Royale Touche