Gurjan, Hardwood & Veneer · Material Guide
A Comprehensive Guide to Gurjan Face Plywood
Gurjan face plywood pairs a dense hardwood veneer face with a strong core, making it a common choice wherever plywood needs to combine appearance with real strength.
What Sets Gurjan Face Plywood Apart
Dense Face Veneer
Gurjan's naturally dense hardwood grain gives the face veneer better dent and impact resistance than softer species used in standard commercial plywood.
Available Thickness
Common thickness options run 6mm, 9mm, 12mm, 16mm, 19mm and 25mm, covering everything from thin facing panels to structural sheets.
Certification to Look For
Genuine gurjan plywood is BIS-certified under two possible standards depending on grade: IS 303 for general-purpose grades like MR, and IS 710 for boiling waterproof (BWP) grades — worth confirming for any wet-area or structural application. See our IS 710 vs IS 303 guide for the full difference.
Factors to Check Before Buying
Confirm the adhesive grade (MR/BWR/BWP), verify the certification stamp, and inspect a cut edge for consistent, gap-free core construction.
Buying With Confidence
Because gurjan carries a price premium over commercial plywood, it's worth taking a moment to check the sheet rather than buying on brand name alone — ask to see a cut edge, confirm the grade stamp, and match the thickness to your specific application rather than defaulting to a single thickness across a whole project.
Going Further
See our gurjan vs commercial plywood guide for how it compares directly to the more common alternative, our gurjan plywood types guide for the different moisture grades available, and our ISI 710 vs ISI 303 guide for the certification standards behind it.
Frequently Asked Questions
What thickness does gurjan face plywood come in?
Common options run 6mm, 9mm, 12mm, 16mm, 19mm and 25mm, covering everything from thin facing panels to structural applications.
Is gurjan face plywood always waterproof?
Not automatically — it's available across different moisture grades from MR to BWP, so check the specific grade stamp rather than assuming waterproofing from the gurjan name alone.
What should I check before buying gurjan plywood?
Confirm the adhesive/moisture grade, look for a genuine BIS certification stamp — IS 303 for general-purpose grades like MR, or IS 710 for BWP grades — and inspect a cut edge for consistent, gap-free core construction.
Why does gurjan plywood cost more than commercial plywood?
The gurjan hardwood species used in its veneers is denser and more expensive to source than the mixed, often softer species used in standard commercial plywood, and that reflects in the price.
Is gurjan plywood worth the extra cost for every project?
Not necessarily — it's most worth it for high-end furniture, structural applications and anywhere impact resistance and appearance both matter; general low-load interior work can often use commercial plywood instead.
Need the Right Board for Your Project?
WhatsApp us your requirement and we'll recommend the right grade and thickness.