Laminates, Veneers, Plywood and MDF for Satellite and Prahlad Nagar
The work in this belt is specified rather than bought off a rate list, and it draws on our whole range — designer laminates, veneers and natural wood, MR and BWP plywood, and the full Action Tesa line. 46 years at Lati Bazar. Same-day delivery on orders placed by 2 PM, cut to size and edge banded if you want it.
Delivery to Satellite and Prahlad Nagar
Delivery details
Same-day dispatch on orders placed by 2 PM. Where a project involves CNC work, the governing date is not delivery but the two to three day cutting turnaround — tell us the date panels are needed on site and we will confirm at the point of order whether it can be met.
For a phased fit-out we would rather deliver in stages against your programme than send everything at once and have finished panels stored on a live site.
The area
The belt runs from Shyamal Cross Roads and Anandnagar across to Jodhpur Char Rasta and Mansi Circle, taking in Ramdev Nagar, the Judges Bungalow Road side, the towers and row houses around Prahlad Nagar Garden, Nehrunagar, and the length of 100 Feet Road.
It is a mix of large flats, row houses and bungalows, and the interiors going into them are generally designed rather than assembled — someone has drawn them, chosen the materials deliberately, and will notice if what arrives is not what was specified.
What this belt specifies
Unusually, all four of our main categories carry weight here, and a single project often uses every one of them.
Designer laminates
Six brands on the racks — Durian, Greenlam, Merino, Aero, Cedar Lam and Royal Touch — in 0.8mm and 1mm. What matters at this level is not the brand name but the depth within it: whether a specification calling for a particular texture, a particular grain direction or a coherent family of shades across a whole house can actually be met from one place. That depth is why projects here come to us rather than to a shop that is closer.
Veneers and natural wood
Where a real timber surface is wanted rather than a printed one. Veneer gives grain that continues across a panel and takes a polish that laminate cannot imitate, and we hold seasoned natural timber for the solid elements — frames, edges, exposed structure. It is the slower, more demanding option and it wants a carpenter who is comfortable working with it.
MR and BWP plywood
MR for the carcass work across the house. BWP where water is present — kitchen sink units, bathroom vanities, utility areas, and anywhere a large flat has a wet balcony or an open terrace edge. On a specified project it is worth marking which items are BWP on the drawing rather than leaving it to be decided on site.
Action Tesa MDF
The complete line, including HDHMR and Moist Master. For routed fronts, profiled shutters, lacquer finishes and anything where the surface must be perfectly flat, MDF is the correct substrate and plywood is a compromise.
Everything we hold
Plywood — all grades
Commercial, MR grade, BWP marine and birch, in the full thickness range. See plywood grades →
Action Tesa MDF
The full line — HDHMR, Moist Master and HMR particle board, not a partial selection. View Action Tesa range →
Laminates
Durian, Greenlam, Merino, Aero, Cedar Lam and Royal Touch, in 0.8mm and 1mm. View laminate hub →
Block board, flush doors & wood
Block board for shutters and long spans, flush doors, and seasoned natural timber. View natural wood →
Seeing it before you commit
The single most useful thing about our counter, for this kind of work, is that the range is physically there to compare. A laminate shade chosen from a phone photograph, or a veneer chosen from a small swatch, is a decision made on incomplete information — and on a project of this size it is an expensive one to revisit after installation.
Bring the drawing, or the mood board, or the client. Put the shortlisted sheets side by side under the same light. If you are matching a veneer across several panels, ask to see the actual sheets that would be supplied rather than a sample of the range, because grain varies between sheets in a way that a swatch cannot show you.
If a shade in your specification is one we do not hold, we will tell you that rather than offer something close and let it be discovered later.
Cut to size, edge banded, ready to install
This is the part of what we do that changes how a specified interior goes together. Panels can leave us cut to your dimensions with the exposed edges already banded, so what reaches the site is a finished component rather than a raw sheet and a set of instructions.
For a designer that means the tolerance is held to the drawing rather than to whatever the site conditions allow, and the finish on an edge is machine-applied rather than hand-trimmed. For a homeowner living in the property during the work, it means the cutting and the dust largely do not happen in the house.
CNC cutting
From ₹800 per sheet, varying with the design. Send the drawing and we will confirm the rate before cutting.
2–3 day turnaround
CNC work takes two to three days. Order ahead of the day you need the panels on site.
Edge banding, in-house
Banding is done on our own machine, not sent out — so cut-to-size panels leave finished on all exposed edges.
Site delivery
Delivered to the address you give us. Charge is worked out by distance and confirmed when you place the order.
The constraint is honest and worth designing around: CNC takes two to three days and that does not compress. Delivery within Satellite is same-day, so the cutting is always the longer lead item.
Satellite and Prahlad Nagar — questions
Order or visit
For a specified project, the counter is worth the visit — decisions about finish are difficult to make from a photograph and expensive to get wrong.
Call
8460783619 — Kaivan Mehta
9426002642 — Nayan Mehta
9825698364 — Rupesh Shah
Message us your list — grade, thickness and quantity, and we will confirm the rate.
Counter address
S T, Bus Stand, 08, Jamalpur St Rd, Gita Mandir, Ahmedabad, Gujarat 380022
Hours
Monday to Saturday, 10:00 AM to 7:30 PM. Payment is cash or advance.
Working to a specification?
Send it across and we will tell you what we can meet from stock and what needs to be arranged, before you commit to it.
Related pages