Plywood, Laminate and Action Tesa MDF for Chandkheda, Motera and Sabarmati
New residential building runs the length of this belt, from Sabarmati up through Chandkheda to Koteshwar, alongside a strong reseller trade. We have supplied from Lati Bazar for 46 years and this belt is on our same-day route — order by 2 PM and it goes out the same day.
Delivery to Chandkheda and Motera
Delivery details
This belt is on the same-day run with a 2:00 PM cutoff, the same as our Ahmedabad city areas. It sits at the far end of that run, so order earlier in the day rather than close to the cutoff. Anything placed after 2 PM goes out the next working day. Charge is by distance, confirmed when you order.
Everything north of here — Shantigram, Bhat, Adalaj and the whole Gandhinagar side — runs on a 24-hour window with a 4 PM cutoff instead. Chandkheda is the last belt on same-day.
The stretch we cover
From Sabarmati and Ranip up through Visat Circle and Chandkheda Cross Roads, along New CG Road, out to Koteshwar Road and the Motera Stadium Road side, as far as Bhat Circle.
It is a long, continuous strip of building rather than a defined neighbourhood — towers and mid-rise blocks going up along the main roads with older housing behind them. Because it runs north to south, the difference in distance between the Sabarmati end and the Koteshwar end is significant, and it shows in the delivery charge.
What the belt buys
The mix here is laminates, MR plywood and Action Tesa MDF, and it splits fairly evenly between families fitting out a new flat and shops buying to resell.
MR plywood carries the carcass work — wardrobes, storage, beds, the dry parts of kitchens. New flats in this belt are mostly two and three bedroom, and a full interior is a predictable material list once you know how much storage is going in.
Laminates are where the choosing happens. Six brands on the racks in 0.8mm and 1mm. In a new tower flat, one thing worth thinking about is that these buildings get a lot of direct light on the upper floors — a dark shade that looked rich in a showroom can heat up and show dust noticeably more on a west-facing wall.
Action Tesa MDF moves well here because a lot of the furniture going into these flats is modular rather than site-built. We carry the complete line — HDHMR, Moist Master and HMR particle board — rather than a partial selection, which matters when a modular specification has to be met exactly rather than approximately.
The full range
Plywood — all grades
Commercial, MR grade, BWP marine and birch, in the full thickness range. See plywood grades →
Action Tesa MDF
The full line — HDHMR, Moist Master and HMR particle board, not a partial selection. View Action Tesa range →
Laminates
Durian, Greenlam, Merino, Aero, Cedar Lam and Royal Touch, in 0.8mm and 1mm. View laminate hub →
Block board, flush doors & wood
Block board for shutters and long spans, flush doors, and seasoned natural timber. View natural wood →
Cutting and banding
In a new tower flat, cutting on site means carrying sheets up in a lift and carrying waste back down. Cut-to-size avoids both.
CNC cutting
From ₹800 per sheet, varying with the design. Send the drawing and we will confirm the rate before cutting.
2–3 day turnaround
CNC work takes two to three days. Order ahead of the day you need the panels on site.
Edge banding, in-house
Banding is done on our own machine, not sent out — so cut-to-size panels leave finished on all exposed edges.
Site delivery
Delivered to the address you give us. Charge is worked out by distance and confirmed when you place the order.
For vepari and resellers along this belt
The reseller trade along this stretch is strong, and it is supplied on different terms from retail.
Trade supply
If you are stocking a shop rather than fitting out a home, this is how it works.
- Volume pricing quoted against what you take, not from the counter list.
- Standing specification on file, so a repeat order is a single message.
- Delivery to the shop on the 2 PM same-day cutoff, consolidated so you are not paying a distance charge on several small trips.
- Range depth — the full Action Tesa line and six laminate brands means you can meet a customer's request rather than send them elsewhere.
Cash or advance. Send your regular list and we will quote against the quantity.
Chandkheda and Motera — questions
Order or visit
Retail or trade, call the same number. Mention which you are so the rate we quote is the right one.
Call
8460783619 — Kaivan Mehta
9426002642 — Nayan Mehta
9825698364 — Rupesh Shah
Message us your list — grade, thickness and quantity, and we will confirm the rate.
Counter address
S T, Bus Stand, 08, Jamalpur St Rd, Gita Mandir, Ahmedabad, Gujarat 380022
Hours
Monday to Saturday, 10:00 AM to 7:30 PM. Payment is cash or advance.
Ordering for a Chandkheda flat or a shop?
Send the list before 2 PM and it goes out the same day. For trade quantities, tell us the volume and we will price against it.
Related pages